Featured Projects

Our work that illustrates the bespoke experiences we designed and built

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

All

Industrial equipment & tools

Optimizing the furnace of a copper smelter

At a large copper smelter plant, the productivity of a smelting furnace and the quality of the product decreased dramatically. Encata carried out thorough multiphysics processes modeling, which gave our customers the information they needed to create a plan for plant modernization.

Read more

All

Robotics

Warehouse robot for e-commerce fulfillment

An autonomous fulfillment robot with a 50 kg payload for warehouses. The robot has IP-45 ingression protection to operate both indoors and (temporarily) outdoors.

Read more

All

Industrial equipment & tools

Tire Pressure Sensor (TPMS) Test Stand

The TPMS Test Stand is a device that controls the quality of finished products. The stand tests tire pressure sensors for correct pressure measurement. The system consists of a test chamber and a control unit.

Read more

All

IIoT & automation

IIoT hot water monitoring system

End-to-end development project with Industrial IoT, thermophysics R&D, embedded algorithms development, mechanical + electronics design, and multiple on-site tests + commissioning. The final product controls, regulates, measures, and monitors real-time thermal energy flow and hot water supply in the industrial and residential heating system.

Read more

All

Healthcare

Medical device for drainage of the pleural cavity

The surgical drain tube with an embedded electrode is a new medical device for drainage of the pleural cavity designed to decrease pressure buildup inside wounds and speed up patients' recovery time after surgical procedures.

Read more

All

Green tech

Atmospheric water generation system

The atmospheric water generation device is engineered to extract water in regions characterized by low humidity and high temperatures. This system achieves water condensation by cooling the air and utilizing MOF sorbents. The setup is capable of producing up to 50 liters of water per day.

Read more

All

Industrial equipment & tools

Thermal Manikin testing system

The Thermal Manikin testing system is designed and manufactured to evaluate the flame resistance and thermal resistance of firefighters' specialized clothing under direct flame exposure and heat flux.

Read more

All

Consumer & wearable

Smart IoT 5-in-1 air purification device

A multifunctional IoT device for personal air control with the ability to kill COVID viruses. The device monitors air quality and can be controlled via a mobile app. Both hardware and software were developed from scratch at EnCata.

Read more

All

Consumer & wearable

Bartender smart spout IoT device

IQ Pod is a liquor and wine dosing device that accurately measures alcohol pour-though in real-time. The IoT hardware functionality integrates with POS automation systems and provides customer self-service functions in the institution.

Read more

All

Smart building

IIoT & automation

Smart inflatable building

A construction technology development project executed from idea to commissioning. The inflatable rapidly deployable structure coupled with fully equipped engineering and IoT systems, electronics, and HVAC systems enables businesses to expand their space and production capacity in the most cost-effective way.

Read more

All

Agriculture

Smart soil irrigation system

A smart soil irrigation system monitors and waters the soil in designated areas. A network of autonomous sensors, along with a control module, generates a soil moisture map and oversees the irrigation equipment fitted with docking stations.

Read more

All

Robotics

Autonomous snooker robot

The autonomous snooker robot is a device that serves as a trainer during a game of pool. The robot can work as a trainer, against a human, or in tandem with them. The kicking mechanism replicates a human kick's dynamics.

Read more

All

Consumer & wearable

Smart cup/kitchen kettle IoT device

SmartCup – an innovative kitchen appliance with IoT functionality and a mobile application. The device Incorporates a range of inventions and a patented cooling technology - all designed from scratch in EnCata. The SmartCup brews coffee, tea and makes baby formula.

Read more

All

Consumer & wearable

Actuator mechanism spinner

Actuator mechanism spinner means a toy with a mechanism installed in place of the central bearing of the spinner. Spinning is achieved by applying a force to the toy by squeezing it rhythmically along the axis of rotation. The speed of the rotation is determined by the force and intensity of the pressure.

Read more

All

Smart building

Cuby House construction technology

EnCata invented and developed a new technology - CUBY CONSTRUCTION. It allows large-scale rapid housing development and modular architecture with repeatable manufacturing quality, comfort and low cost.

Read more

All

Healthcare

Sleeping Pod

Reyou capsule for rest, sleep, quick recovery and improved psycho-emotional state during the working day.

Read more

All

Healthcare

A multifunction gate with an innovative bactericidal disinfection system

Gate|0 is a unique multifunctional disinfectant system for crowded places, offices, and mobile hospitals, providing an overhead shower of disinfectant solution for a few seconds as individuals pass through the gate.

Read more

All

Vehicles

IP-66 housing for a car-sharing company

Custom dust and moisture-resistant IP66 enclosure for automotive application, accommodating a custom PCB. EnCata delivered the industrial design, DFM, and manufactured in-house a steel mold along with the first batch and product assembly.

Read more

All

Industrial equipment & tools

CFD computer simulations for New type Gas burner

Heat transfer computer simulations and design of a new type of ceramic gas burner employing IR-irradiation effect. The novel industrial gas burner design demonstrated superior efficiency in comparison with conventional heating modules.

Read more

All

Vehicles

Mobile system for radio communication

The project's aim was to develop an industrial design and build a prototype for the antenna. The antenna system is a mobile UHF radio communication system. It's used for navigating ships, as well as radio control of unmanned aerial vehicles (UAVs). The device is installed at a depth of up to 50 meters from the ship.

Read more

All

Industrial equipment & tools

5-axis CNC machine

MiniCNC is a compact 5-axis CNC machine used for prototyping. Its main functions include precise processing of a wide range of materials (non-ferrous metals, waxes, modeling plastics) and producing high precision parts of small dimensions. Its low prime cost serves as its primary competitive edge.

Read more

All

Other

Self-managed cold electronic storage for digital assets custody

The Piston Vault is secure electronic custody safe for Spark™ wallets. The safe design provides storage and reliable connectivity, ready to control and execute blockchain-enabled safe transactions.

Read more

All

Healthcare

VR surgery training and simulation platform

Hyper-realistic simulations with the maximum level of immersion using VR with a full-body tracking suit and tactile feedback system​. Surgical training and simulation VR platform integrates a software and hardware complex which is used in carrying out collaborative operations and tool skills training with the help of VR-technologies.

Read more

All

Consumer & wearable

Compact machine for horizontal directional drilling

The hydrodrilling tool is a horizontal directional drilling (HDD) device for trenchless pipe-laying. It is used to create a pilot borehole and a borehole of a specified size.

Read more

All

Smart building

Aerocapsule for noise-insulation in the crowded places

AeroCapsule is a soundproof booth for meetings, time-off and secluded work in public areas. It is designed for use in locations with variable ambient noise loads, such as manufacturing facilities, offices, airports and other overcrowded areas.

Read more

All

Green tech

Vehicles

Electric skateboard for urban mobility

An electric skateboard is designed for simplifying short-distance travel around the city. The device is a reliable, eco-friendly, convenient, and intelligent type of urban transport with the possibility of integration into urban infrastructure.

Read more

All

Healthcare

Blood Container

The blood container is designed for automated whole blood centrifugation in a specialized centrifuge.

Read more

All

Healthcare

Laminar flow box for GMP production line

Rapid custom development and batch production project for a new pharmaceutical plant. The specific size and assembly requirements compounded the challenge for the laminar clean hood design.

Read more

All

Vehicles

VTOL impeller design

The R&D project involved a range of aerodynamic simulations for a new generation electric flight design. The project focused on optimizing multirotor three-bladed propellers’ efficiency within impeller ‘barrel’ geometry with further DFM.

Read more

All

Vehicles

Autonomous Drone Station

A hangar for the drone on autonomous control with a built-in charging system. Equipped with a robotic drone positioning/landing system. The hangar design allows the drone to take off and land automatically.

Read more

All

Smart building

The house-building system “Ecocube"

ECOCUBE is a system which allows for building energy-efficient, environmentally friendly, economical houses from natural renewable materials.

Read more

All

Industrial equipment & tools

Explosion-proof industrial vacuum cleaner

Industrial explosion-proof (Ex-proof) vacuum cleaner designed to work with sugar dust combined with the central cleaning system of the sugar mill.

Read more

All

Industrial equipment & tools

Explosion-proof industrial baghouse for dust collection systems

A large Ex-proof modular baghouse designed and produced for a sugar processing plant. The filter unit cleans 32,000 m3 of dusty air per hour and operates automatically, taking advantage of smart mechanical and electrical design.

Read more

All

Agriculture

Hydroponics IoT Plant Pot

An industrial design and product development project of the “click-and-grow” smart plant pot with IoT functionality and significant stress on customized UX/UI design and functionality.

Read more

All

Agriculture

Urban Farming IoT System for Plant Growth

An autonomous smart IoT plant growing system Fito Slim for urban farming. The product designed around a “plant and forget” philosophy, outperforming conventional soil and hydroponic solutions. The product allows users to manage the indoor plantation via a mobile application.

Read more

All

Consumer & wearable

3D body scanner

A high precision body scanner for fashion retail. The scanner design is a rotating platform with a set of digital cameras measuring body parameters. Digital images are then transferred via a Wi-Fi interface to a PC and undergo real-time conversion into a digital 3D model.

Read more

All

Vehicles

Truck Variator

A continuously variable frictionless transmission prototype (proof-of-concept) with high torque was developed and manufactured, based on a client’s patented invention. The prototype EnCata designed and built then went for static testing and further development.

Read more

All

Other

Digital fab lab to incubate hardware startups

MakeIT.Center is an automated fabrication laboratory (Fab Lab) franchise to incubate hardware projects. A technological space where anyone can rent advanced equipment and industrial tools to create almost any prototype from an idea to alpha-version independently or under the guidance of our operators.

Read more

All

Vehicles

A system for analyzing the parameters of the vessel's movement

Marineo is a unified information and telecommunication system that analyzes a vessel’s movement data and the surrounding hydrometeorological situation automatically. The installation cuts down on fuel use while also improving marine navigational safety.

Read more

All

IIoT & automation

AI-powered tools and equipment tracking solution

5S tool board systems empowered with machine vision AI neural network to control tool availability. Such that no item can be checked-out or missing from its place in a workshop. The solution can be transferred to other industries requiring ongoing object recognition.

Read more

All

Smart building

Sludge Recycling Feasibility Study

The project concerned the technology and economic feasibility assessment of sludge treatment in the North of Oman. The study conceived the plan for the waste disposal plant construction with 100 tons daily of sludge utilization capacity.

Read more

All

IIoT & automation

IoT-powered CRM and ERP Software Platform for Manufacturing

IoT-driven cloud-connected platform for fabrication laboratory and makerspace workshops allowing tools and equipment rental. Software management system combines CRM and ERP features, multi user interface and allows makerspace easy scalability.

Read more

All

Other

Educational platform MakeIT School

MakeIT School is an educational platform for schools designed to popularize engineering among the youth by making learning the basics of design and prototyping feasible for aspiring engineers and high-school students.

Read more

All

Smart building

Digital transformation and feasibility study for a large construction company

A digital transformation consultancy project for a large construction company from Europe with a focus on developing and implementing cutting-edge IoT technologies for service, utilities, residential houses, and building management.

Read more

All

Analytical & lab equipment

Healthcare

Fourier Spectrometer

We designed and produced the Fourier Spectrometer prototype based on an existing research lab prototype made by the customer. EnCata’s role included industrial design, mechanical and electrical engineering documentation, and a manufactured prototype.

Read more

All

Agriculture

Grain temperature monitoring system

A new design temperature transducer for grain crops and vegetable warehouses.

Read more

All

Other

Blockchain-based fund asset control system for issuing vouchers

A blockchain-based solution to control and manage three-party (service provider / donor / end-customer) contractual engagements. The voucher issuance system incorporates smart contracts and automates document flow, reducing overheads for all parties involved.

Read more

All

Consumer & wearable

IoT-powered Rodent detector

The detector registers and sends a rodent presence report in mandatory control areas: catering, food production, farms. A rodent bait is placed inside the detector. As soon as a rodent enters the detector, a sensor is triggered and a message is sent to the cloud. The message contains data about the state of the detector and a count of registered rodents.

Read more

All

Healthcare

Consumer & wearable

Wearable medical smartwatch

The smartwatch Sputnik checks a person’s vital signs and calls an ambulance if their health is deteriorating. It has the ability to save the life of someone recovering from heart attack or stroke, especially when there is a high risk of recurrence.The bracelet will also provide timely aid to an elderly person, notifying doctors and relatives of their falling health.

Read more

Have a project to do?

Fill out the form and a member from our sales team will get back to you

Thank you!
Your request has been submitted! We shall contact you shortly

Oops! Something went wrong... Try to reload this page and resubmit

FAQ

At EnCata, what kinds of contracts do you use? Is it a fixed-term or an agile contract?
Can you provide me with a certification of competence?
What level of training do your specialists have?
Is it possible for us to cooperate with EnCata’s team?
Is it possible to discuss the project with your technical team?
Can EnCata facilitate mass production?
Do you sign NDAs?
Patent or Develop first?
Does EnCata outsource electronics services?
Do you write program code, either software or firmware?
Are there hardware engineers in your team?
What should I do now that I've approached you with my project idea?
Can EnCata help me with fundraising?